How to Hang Curtains in an Apartment without Drilling.
If you’re renting, don’t want to commit to making holes in your walls, or just don’t trust your own handiwork with a drill, there are numerous causes to be wary of taking that route. Fortunately, there are usually short-term options available as an alternative to screws and nails.
There is no need to resort to drilling for hanging curtains; there are a multitude of alternatives such as magnets, adhesives, and even natural tension.
You can easily choose your favorite from the many options available for installing curtains without drilling. All of them seem to be much simpler than using a drill.
Tips
Here are 9 things to remember for a successful installation.
- Measure accurately.
- Take into account the style of the room.
- Pick the right rod.
- Use holdbacks.
- Think about fabric choice.
- Consider the length of the curtains.
- Use the right hanging hardware.
- Take into account the window sill.
- Make sure panels overlap.
How to Hang Curtains in an Apartment Without Drilling
1. Utilizing Adhesive Hooks to Attach Curtains to the Wall
Adhesive hooks, which can be found in different styles, attach to walls and can be used in combination with most straight curtain rods. To hang curtains using adhesive hooks, here is the procedure to follow.
Step 1: Buy the Right Adhesive Hooks
For each window, two adhesive hooks should be acquired. The hooks should be robust enough to handle drapery and attractive enough to look good in the room. Different weight loads and designs are available, so make sure to get a set that will do the job.
Step 2: Attach the Hooks to the Wall
Read the directions that accompanied the adhesive hooks. Remove the backing from the hooks and place them cautiously on the walls.
Step 3: Allowing the Hooks to Remain in Place
Wait the advised amount of time indicated in the instructions before you hang your curtains. Otherwise, your adhesive hooks may not stay up on the wall.
Step 4: Install Your Drapery and Drape Rod
By mounting your drapery and drape rod, you can complete the look of your window and create a cozy atmosphere.
Hang your curtains on the curtain rod, then attach the rod to the hooks.
No matter the type of window you have, there are some essential tips to keep in mind when hanging curtains or shades.
2. Utilizing a Tension Rod to Mount Curtains
To begin, identify the ideal spot for the curtains and then install the tension rod in this spot. Make sure it is level and secure.
No hardware or hooks are necessary to install a tension rod, which is inserted into the window frame. However, the selection of styles is limited.
Step 1: Get the Appropriate Tension Rod
In order to purchase the right size tension rod, measure the interior of your window. To ensure a secure fit, you should take the measurement between two protrusions.
Next, find a tension rod that is suitable for your window. Because they are adjustable, ensure that the minimum and maximum length of the rod is correct.
Step 2: Modify the Bar
Bring the tension rod up to your window and adjust it until it is slightly shorter than the window by about an inch.
Step 3: Place the Rod Within the Window Frame
Position one side of the tension rod in its desired location. Subsequently, expand the rod until the other end sits in its desired spot.
Step 4: Install the Drapery Rod and Secure the Drapes
Carefully ease your curtains onto the tension rod and then insert it back into the window. To ensure that the rod is secure, expand it slightly. You will want to make sure the rod is tight enough to remain in its place even when you have released it.
3. Utilizing a Magnetic Rod for Hanging Curtains
This guide outlines the steps for installing curtains with a magnetic rod.
A selection of magnetic rods can be obtained, and some of them are equipped with adhesive strips that permit them to be mounted on different materials, such as metal surfaces and walls.
Step 1: Obtain an Appropriate Magnetic Bar
Discover a magnetically charged drapery rod that is lengthy enough to encompass your window, sufficiently powerful to support your draperies, and attractive enough to exhibit on your wall.
Step 2: Affix the Pole to the Wall
Position the drapery rod in the desired spot and ensure it adheres to the wall.
Step 3: Mount Your Drapes
To hang your curtains, begin by detaching the rod from the wall. After that, slide the curtains onto the rod and reattach it to the wall.
4. Utilizing a Stick-On Rod for the Installation of Curtains
Hanging curtains using a stick-on rod is a relatively easy task.
Various styles of stick-on rods are obtainable, some of which come complete with hardware for a more solid fixing onto the wall.
Step 1: Get the Appropriate Adhesive Rod
When making a decision about stick-on curtain rods, one should take into account the size, strength, and appearance. It is important to find a rod that is wide enough to fit the window, strong enough to hold the curtains, and attractive enough for the room.
Step 2: Secure the Bar to the Wall
Consult the accompanying instructions that came with your curtain rod. Odds are, the rod is equipped with two adhesive brackets. To install them, you can simply remove the backing and attach them to the wall.
Step 3: Allow the Rod to Remain in Position
Allow the curtain rod to remain affixed to the wall for the recommended duration of time as per the instructions provided. This will ensure that it stays put after the installation has been completed.
Step 4: Mount Your Drapes
To hang your curtains, you may have to take off one end of the rod or take the rod out of its bracket. (Refer to your installation instructions for guidance.)
5. Mounting Curtains with a Twist-and-Fit Pole
One way to hang curtains is by using a Twist-and-Fit rod. This type of rod is easily adjustable and requires no tools.
Twist-and-fit rods are similar to tension rods in that they fit inside a window frame; however, they have a more ornamental design that mimics classic curtain rods.
Step 1: Get the Appropriate Twist-and-Fit Rod
To determine which twist-and-fit rod is suitable for your window, measure the inside of the window first.
Additionally, make sure that the size of the rod is within the minimum and maximum length range. Finally, take into account the aesthetic of the rod and how it will look within your space.
Step 2: Alter the Bar
Insert the twist-and-fit rod within the window opening and size it up until it is almost long enough to remain in its position.
Step 3: Hang Your Drapes and Secure the Support Rod
Insert your curtain rod into the window frame, with one end adjacent to one side of the window. Stretch out the rod until the other end meets the other side. Finally, keep extending the rod until it is securely fastened in position.
Also read: How to Hang A Tapestry on the Ceiling: A Step-by-Step Guide
Shery
